Shyam Metals & Alloys is a premier, certified SS 304 STRIP Manufacturer in India, utilizing modern cold-rolling mills and automated precision slitting machinery to produce top-tier strip products. Our SS 304 strips deliver the standard-setting versatility required for complex drawing, stamping, and manufacturing setups, ensuring optimal elasticity and excellent chemical durability across diverse service temperatures.
As a recognized SS 304 STRIP Stockist in India, we carry an expansive on-floor inventory spanning various thickness profiles, hardened tempers, and modern surface finishes like 2B, Bright Annealed (BA), and brushed No. 4. Our dedicated material warehouses enable rapid turnaround times, meaning your construction or assembly line stays perfectly on track with minimal material delays.
Deciding on Shyam Metals & Alloys as your dedicated SS 304 STRIP Supplier in India secures you direct manufacturer pricing, complete material traceability, and official Mill Test Certificates (MTC) conforming to global ASTM A240 standards. We focus on executing custom slitting runs with micro-tolerances to make sure our finished products align exactly with your operational metrics.
Technical Quick-View
- Grade Composition: 18% Cr / 8% Ni (18/8 Alloy)
- Theoretical Density: 7.93 g/cm³
- Thickness Range: 0.05 mm - 6.0 mm
- Minimum Width: 3.17 mm (Slit)
Technical Specifications & Standards
| Standard Compliance | ASTM A240 / ASME SA240, ASTM A666 |
| Alloy Grades | SS 304 (UNS S30400), SS 304L (Low Carbon UNS S30403), SS 304H (High Temperature UNS S30409) |
| Available Thicknesses | 0.05mm to 6.0mm (Automated thin foils & heavy gauge coil slitting) |
| Slit Width Range | 3.17mm up to 1250mm (Micro-slitting setups configured) |
| Edge Treatments | Precision Slit, Deburred, Smooth Round-edge, or Mill Edge options |
| Surface Conditions | 2B (Cold Rolled Matte), BA (Bright Annealed), No. 4 (Satin/Brushed), No. 8 (Mirror Finish) |
| Tempered Options | Annealed (Soft/DDQ), Quarter Hard, Half Hard, Full Hard |
| Certificates Supplied | MTC as per EN 10204 3.1, PMI Testing, Intergranular Corrosion (IGC) Reports, ISO compliance |
Chemical Profile (ASTM A240)
| Element | SS 304 (%) | SS 304L (%) |
|---|---|---|
| Carbon (C) | 0.08 max | 0.03 max (Carbon restricted) |
| Chromium (Cr) | 18.00 – 20.00 | 18.00 – 20.00 (Oxidation shield) |
| Nickel (Ni) | 8.00 – 10.50 | 8.00 – 12.00 (Austenitic stabilizer) |
| Manganese (Mn) | 2.00 max | 2.00 max |
| Silicon (Si) | 0.75 max | 0.75 max |
| Phosphorus (P) | 0.045 max | 0.045 max |
Mechanical Capability
| Tensile
Strength Minimum ultimate strength rating |
515 MPa (75,000 psi) |
| Yield Strength 0.2% Offset displacement mark |
205 MPa (30,000 psi) |
| Elongation Total stretch percentage in 50mm gauge |
40% Min |
| Hardness limits Max Brinell & Rockwell rating |
92 HRB / 201 HBW |
Key Advantages of Our SS 304 Strips
Cost-Efficient Workability
Offers the perfect economic compromise for applications requiring robust structural strength and reliable atmospheric protection.
Superior Drawability (DDQ)
Deep-Drawing Quality (DDQ) composition allows manufacturing without structural micro-cracking during aggressive pressing and stamping.
L-Grade Sensitization Shield
Our SS 304L profiles restrict carbon levels below 0.03%, preventing grain boundary carbide precipitation during hot welding.
Interactive SS 304 Strip Weight Calculator
Input your dimensions below. This calculator uses a precise density variable of 7.93 g/cm³ (specifically adjusted for Stainless Steel 304/304L alloys).
Typical Industrial Applications
- Automotive Components: Clamps, visual vehicle trims, heat shield elements, and heavy gasket seals.
- Consumer Appliances: Pressed kitchen components, appliance panels, heating elements, and hardware.
- Architecture & Decor: Safety stair nosings, wall edge guards, expansion joint layouts, and dynamic cladding.
- Industrial Processing: Gasket rings, general support structures, filters, and chemical storage linings.
Find us at the office
Director
Mr. Shyam Solanki
+91 9892324675 / +91 9867573675
Helpline
No.
080 48965776
Office: 022 66159075/ 022 23864675
