Shyam Metals & Alloys is an esteemed SS 304 STRIP Manufacturer in India, producing premier 18/8-grade slit coils built on modern cold-rolling mills and automated precision slitting machinery. Our SS 304 strips deliver the standard-setting versatility required for complex drawing, stamping, and fabrication setups, ensuring optimal elasticity and reliable chemical durability across diverse service temperatures.
As a trusted SS 304 STRIP Stockist in India, we carry an expansive ready inventory featuring diverse thicknesses, hardened states, and surface finishes like cold-rolled 2B, Bright Annealed (BA) and satin No. 4. Our advanced slitting centers process materials under strict tolerances, ensuring that you receive precise strip solutions that match your engineering parameters perfectly.
Choosing us as your strategic SS 304 STRIP Supplier in India ensures you gain immediate access to top-grade metal with fully traceable Mill Test Certificates (MTC) conforming to EN 10204 3.1. We focus on providing direct pricing, custom packing configurations, and on-time industrial delivery routes to help keep your high-precision project on budget and schedule.
Technical Quick-View
- Chromium (Cr): 18.0% - 20.0% (Oxidation Shield)
- Theoretical Density: 7.93 g/cm³
- Thickness Range: 0.05 mm - 6.0 mm
- Minimum Width: 3.17 mm (Slit)
Technical Specifications & Standards
| Standard Compliance | ASTM A240 / ASME SA240, ASTM A666 |
| Alloy Grades | SS 304 (UNS S30400), SS 304L (UNS S30403 - Low Carbon), SS 304H (High Temperature UNS S30409) |
| Available Thicknesses | 0.05mm to 6.0mm (Custom thin foils & shim stock available) |
| Slit Width Range | 3.17mm up to 1250mm (Precision automated slitting) |
| Edge Treatments | Precision Slit Edge, Deburred, Rounded, or Mill Edge |
| Surface Conditions | 2B (Matte Cold Rolled), BA (Bright Annealed), No. 4 (Satin), No. 8 (Mirror), Hairline |
| Tempered Options | Annealed (Soft / DDQ), Quarter Hard, Half Hard, Full Hard |
| Certificates Supplied | MTC as per EN 10204 3.1, PMIs, Raw Material Origin Certificate, Intergranular Corrosion (IGC) Reports |
Chemical Profile (ASTM A240)
| Element | SS 304 (%) | SS 304L (%) |
|---|---|---|
| Carbon (C) | 0.08 max | 0.03 max (Prevents sensitization) |
| Chromium (Cr) | 18.00 – 20.00 | 18.00 – 20.00 |
| Nickel (Ni) | 8.00 – 10.50 | 8.00 – 12.00 |
| Manganese (Mn) | 2.00 max | 2.00 max |
| Silicon (Si) | 0.75 max | 0.75 max |
| Phosphorus (P) | 0.045 max | 0.045 max |
Mechanical Capability
| Tensile
Strength Minimum ultimate strength rating |
515 MPa (75,000 psi) |
| Yield Strength 0.2% Offset displacement mark |
205 MPa (30,000 psi) |
| Elongation Total stretch percentage in 50mm gauge |
40% Min |
| Hardness limits Max Brinell & Rockwell rating |
92 HRB / 201 HBW |
Key Advantages of Our SS 304 Strips
Cost-Efficient Workability
Offers the perfect economic compromise for applications requiring robust structural strength and reliable atmospheric protection.
Superior Drawability (DDQ)
Deep-Drawing Quality (DDQ) composition allows manufacturing without structural micro-cracking during aggressive pressing and stamping.
304L sensitization Prevention
With low-carbon 304L, grain boundary carbon concentration is kept low, preventing post-weld cracking and intergranular corrosion.
Interactive SS 304 Strip Weight Calculator
Input your dimensions below. This calculator uses a precise density variable of 7.93 g/cm³ (specifically adjusted for Stainless Steel 304/304L alloys).
Typical Industrial Applications
- Automotive Components: Clamps, visual vehicle trims, heat shield elements, and heavy gasket seals.
- Consumer Appliances: Pressed kitchen components, appliance panels, heating elements, and hardware.
- Architecture & Decor: Safety stair nosings, wall edge guards, expansion joint layouts, and dynamic cladding.
- Industrial Processing: Gasket rings, general support structures, filters, and chemical storage linings.
Find us at the office
Director
Mr. Shyam Solanki
+91 9892324675 / +91 9867573675
Helpline
No.
080 48965776
Office: 022 66159075/ 022 23864675
